Mecnote : Physically Swap Your Current Drive with the SSD

Cari Model Mac

Friday, 9 February 2018

Physically Swap Your Current Drive with the SSD

Now let's remove the old drive and install the SSD.

1. Turn the computer off and remove the back panel. Turn your laptop off and then disconnect both the power cable and any other connected cables -- including the SSD. Then unscrew the back panel and remove it to get access to your hard drive.
2. Look for any screws securing your drive to the laptop. You'll need to unscrew those before you can remove the drive.
ssd upgrade unscrew drive 670x381
3. Lift the old drive up about 30 or 45 degrees and pull it out.
ssd upgrade remove drive 670x351
4. In its place, install the SSD and put the back panel on.  Install the SSD by doing the reverse of how you removed the HDD: Slide the drive in at an angle and push it firmly into place so it's fully connected to the interface. Then secure it with the screw you removed in the last step and, finally, screw the back panel covering the drive back on.

Semoga tips ini dapat membantu anda. 

Jangan lupa share ya.








Anda ada masalah dengan MacBook/Laptop/Iphone?

Slow

Rosak

Serangan Virus

Jangan risau!! 
Kami boleh bantu menyelesaikan masalah anda.. 

Tak tahu dimana lokasi 

MACNOTE STUDIO UIA Gombak?

Anda boleh hubungi kami melalui:

          ·   WhatsApp Abang M
          ·   Facebook Macnote studio
          ·   Careline 013 531 6110


Lot 1 As-Souq At-Tullab ,Mahallah Ali Ibn Talib, 
International Islamic University Malaysia, 
Universiti Islam Antarabangsa, 
53100 Jalan Gombak, 
Wilayah Persekutuan Kuala Lumpur


Google Maps : Macnote Mobile
E-mail  : macbookstation@gmail.com


Waktu Operasi : Isnin - Ahad (10 a.m. - 9 p.m.) Setiap Hari



Anda boleh datang terus ke MACNOTE di UIA Gombak:

1. KAMI DI GOMBAK ( DALAM UIA GOMBAK)

- 15 MINIT DARI KEPONG DAN SELAYANG

- 25 MINIT DARI BANGSAR DAN AMPANG 

- 30 MINIT DARI SETAPAK DAN SENTUL

-40 MINIT DARI PUCHONG DAMANSARA DAN CHERAS